Clio 2 RS Competition Engine Mount Individual Parts

The mounts replace all of the standard mounts and aluminium castings that bolt onto the engine and gearbox. This strengthens the whole mounting system by removing the weak standard castings.
They are a very strong, robust design suitable for very high output engines.

This kit has now been upgraded and comes with polyurethane mounting bushes.

Should you require to renew the bushes at any time they are very cheap and easy to replace.

This kit is made from laser cut steel profiles MIG welded and powder coated. The bushes are much stiffer than standard to give the very best engine support while still allowing some compliance to avoid damaging stresses on the engine and body.

Individual mounts available include:

One upper engine body mount,
One upper engine, engine mount,
One cambelt cover plate,
One lower gearbox 'dogbone' mount,
One lower gearbox, gearbox mount,
One upper gearbox body mount,
One upper gearbox, gearbox mount,
All fixing nuts, bolts and washers required.

Due to the construction and rigidity of these mounts they are not recommended for road use due to the transfer of noise and vibration into the cabin. Please note that the upper gearbox mount has no battery tray or any mountings for the original wiring loom or coolant hoses - the battery will need to be relocated.

The PH1 and PH2 dogbone mounts are slightly different - please select which one you require from the menu above

Fitting instructions here:
Fitting Guide